Определите требование
Share a drawing, sample or installation problem. Identify the critical interfaces, material specification, anticipated volume and target timing.
WORK TOWARDA reviewable brief
DESIGN & ENGINEERING / Xiaogu Electric
Design & Engineering.
Built around the Fit.
Xiaogu Electric develops cable ties and fastening components around the details of your assembly. From a drawing or sample to mold development and injection molding, we connect your requirements with a practical manufacturing route.
THE INTERFACE
is the starting point.
is the starting point.
In-house mold workshopDevelopment connected to manufacturing
20 injection molding machinesFrom tooling to molded components
Sample & performance reviewFit, tensile and temperature requirements
UNDERSTAND THE ASSEMBLY
Design for the Fixing Point
INTERFACE STUDY / PANEL MOUNTING
Толщина панелиЗадний зазорНаправление прокладки жгута
Mounting concept
Start with the Hole. Check the Space Behind It.
A fixing that matches the nominal hole size still needs the right panel thickness, rear clearance and harness direction.
Bring these details into the review
- Hole shape, dimensions and tolerances
- Panel thickness and available rear clearance
- Insertion access and required retention
INTERFACE STUDY / EDGE FASTENING
Толщина кромкиГлубина заделкиМаршрут прокладки кабеля
Mounting concept
Use the Edge as a Defined Interface.
Review the edge material, thickness and engagement depth together. The clip also needs to position the harness where your assembly allows.
Bring these details into the review
- Edge thickness, material and usable depth
- Направление ремней безопасности относительно края
- Installation access and retention criteria
INTERFACE STUDY / CABLE & PIPE ROUTING
Диаметр трубыМонтаж со стороны трубыПакет / маршрут
Mounting concept
Review Two Diameters in One Assembly.
The pipe-side fit and the cable bundle are separate requirements. Share both dimensions and the clearance around the intended route.
Bring these details into the review
- Pipe outside diameter and tolerance
- Минимальный и максимальный диаметр пучка
- Clip orientation and surrounding clearance
INTERFACE STUDY / HARNESS BUNDLING
Диаметр пучкаДлина / ширина галстукаЗапорная головка
Mounting concept
Define the Bundle Before Choosing the Tie.
Tie length, width, locking geometry and material need to suit the actual harness. Include assembly access and the conditions the part will encounter.
Bring these details into the review
- Bundle diameter range and tie dimensions
- Locking design and installation method
- Требования к материалам и эксплуатационным характеристикам
Existing Range or a New Geometry?
Begin with our established cable tie and fixing families. If the interface does not fit, bring a drawing or sample for a custom development review.
CO-DEVELOPMENT / A SHARED SPECIFICATION
Our Development Process
Review Structure & Tooling
Discuss part geometry, PA66 material requirements and mold scope. Agree the dimensions and features to retain before proceeding with tooling.
WORK TOWARDAn agreed development scope
Evaluate & Refine
Review samples in the intended assembly. Compare fit and performance against the agreed criteria, then confirm any required adjustments.
WORK TOWARDA sample evaluation record
Prepare for Production
Confirm the approved specification, inspection requirements, packaging and order schedule so purchasing and manufacturing work from the same information.
WORK TOWARDA production specification
Planning a new mold? Typical development is around two months, subject to the part and tooling scope. Costs, milestones and timing are confirmed after project review.
OEM / ODM process
DEVELOPMENT MEETS MANUFACTURING
In-House Mold Development
Our in-house mold workshop supports structural optimization and new product development. Injection molding connects those decisions to the manufactured fastening component.
400+In-house molds supporting our product range and manufacturing capability
Geometry
Review the locking feature, mounting interface and dimensions that influence the fit.
Материал
Define the PA66 material requirement and discuss the evidence needed for the intended conditions.
Production
Connect the specification with molding, treatment, inspection and packaging requirements.
EVIDENCE BEFORE APPROVAL
Оценка образца
Dimensional & Assembly Fit
Compare critical dimensions with the drawing. Evaluate insertion access, fixing engagement, cable route and clearance in your intended assembly.
Performance Requirements
Our in-house testing capability includes tensile and high / low temperature tests. Discuss the method, conditions and acceptance criteria for the selected part.
Documents & Inspection
IQC, IPQC and FQC connect incoming materials, production checks and final inspection. Review certificate and report scope against the actual model and material.
MAKE THE FIRST REVIEW USEFUL
Start Your Project
FROM THIS PAGE TO YOUR PROJECT
Project Requirements
0 details selectedCan we start from a sample rather than a drawing?
Yes. Xiaogu Electric supports development based on customer drawings or samples. Explain the mating geometry, dimensions that must remain unchanged and the performance requirements, so a physical sample has the right application context.
Should we start with a standard part or custom tooling?
Review the existing product families against the installation requirements first. Custom development is worth discussing when the mounting interface, space or other critical features cannot be met by an existing model.
Does a material report qualify the finished assembly?
A report applies to its stated sample, material and test scope. Share your required standards and operating conditions so relevant documentation and any additional evaluation can be discussed for the selected component.
СВЯЗАТЬСЯ С «XIAOGU ELECTRIC»
Обсудите свой проект
Запросите информацию о продукции, бесплатные образцы или индивидуальное коммерческое предложение по крепежным изделиям.
- Стандартные компоненты
- Оценка образца
- Индивидуальная разработка
Напишите нашей команде по электронной почтеcunliu178@gmail.com
За кулисами компании «Xiaogu Electric» · литье под давлением
Russian 
English 
Spanish 
French 
German